+90 530 493 30 01 info@znr.com.tr TürkçeEnglish Online Payment
Dealer login
Home  /  Solutions  /  Marine  /  Boat coating
Marine

Wooden and fiberglass boat coating

Coating a boat differs from work on land in two ways: the surface moves constantly and contact with water is permanent. On a wooden boat it is decisive that the seams stay elastic; on a fiberglass boat, that the lamination is free of voids. The ZNR marine group contains separate products for these two jobs.

This system write-up is a draft. The role of the layers was compiled from the products’ own descriptions and declared uses, but the layer order and product matching have not passed technical approval. Have the technical team verify it before writing it into a specification.

Underwater antifouling paint is not in the ZNR catalogue. The topcoat below is for above-water areas; the underwater coating is bought from another supplier.

The primer row appears once in the variants, but the data is more interchangeable than that: both ZNR PRIMER MPU 345 and ZNR PRIMER MEP 445 are declared for wooden and for fiberglass boats. The split here — polyurethane on wood, epoxy primer on fiberglass — is a preference made with topcoat compatibility in mind; the data does not state a single right answer.

Which one is your job?
01 — System

Fiberglass boat

4 layers, in application order.

LayerProductRoleConsumption and packaging
01 Lamination ZNR LAMINATE MEP 234
902
Resin for glass-fiber and carbon-fiber wraps. Between the fiber layers in repair and strengthening. Varies according to the weight of the fiber. Approximately 3 times the weight of the fiber.
10 kg and 20 kg ready-to-use sets
02 Fairing and leveling ZNR PUTTY M LIGHT
906
Filling and fairing on polyester surfaces. Because it is light, weight is not a problem even with thick fairing. 0.750 kg/m² for 1 mm thickness | (Varies depending on surface conditions)
2 kg, 10 kg, and 20 kg | ready-to-use sets
03 Primer ZNR PRIMER MEP 445
901
Solvent-free epoxy impregnating primer; before the topcoat on underwater and above-water parts. Mandatory. 350–500 g/m² | Varies depending on surface conditions
10 kg and 20 kg ready-to-use sets
04 Topcoat ZNR MPU 370
905
UV-resistant aliphatic polyurethane over the epoxy system. On above-water areas. Mandatory. 0.150–0.250 kg/m² in a single coat | Varies depending on surface conditions
20 kg ready-to-use set

Consumption and packaging are read from the product record and are not written separately on this page — when the product is updated, this is updated too.

02 — Products

ZNR products used in this system

8 products. The other items in the system (insulation board, dowel, drainage board, mechanical work) are not ZNR products and are not in the catalogue.

03 — From the field

Frequently asked questions

Why does a polyurethane topcoat go over the epoxy primer?

Epoxy is strong on adhesion and as a barrier, but it yellows and chalks under UV. Aliphatic polyurethane brings the UV resistance. The two work together: grip below, durability above.

How is the free-flowing or non-sag type of seam compound chosen?

According to the position of the surface. On a horizontal deck the self-leveling type (SL30) fills the joint from the bottom up; on the gunwale and sloping surfaces the non-sag type (MPU 25) stays in place. Both are polyurethane based and elastic.

Why must the fairing compound be light?

Fairing compound goes over the whole hull surface as a thin coat; a heavy compound adds serious weight in total. A low-density compound does the same job without the weight.

Is underwater coating part of this system?

It is not. This system covers above-water areas. The antifouling paint needed below the waterline is not in the ZNR catalogue; that item is bought from another supplier.

Let’s discuss the detail on site

Details such as the parapet return, the drain mouth and the expansion joint decide the fate of the system. Our technical team looks at it in place.

Request technical support